CONQUER glass tube fuse series SMP/SDL/SCF parameter introduction

Date：2024-02-27 Viewed：2621

SMP series CONQUER //www.907706.com/products/category-241/ is a kind of fast fusing fuse, which has the characteristics of fast fusing speed and stable fusing characteristics. It can be applied to the occasions with high circuit protection requirements, such as precision instruments and communication equipment. SMP series fuses have a wide range of rated voltages to meet the needs of circuits with different voltage levels. In addition, its operating temperature range is -55℃ ~ +125℃, suitable for a variety of harsh environments.

SDL/SDP series CONQUER glass tube fuse is a kind of time delay fuse, which has the characteristics of slow fusing speed and shock current resistance. It is suitable for occasions where the impulse current is large in the circuit startup process, such as motors, transformers, etc. SDL/SDP series fuses can withstand large impulse current without blowing when the circuit is started, thus ensuring the normal start and operation of the circuit. At the same time, its fusing characteristics are stable and reliable, and it can cut off the circuit in time when the circuit is overloaded or short circuit.

SCF series CONQUER glass tube fuse is a fast fuse with green mark. In addition to the basic characteristics of fast fuses, it also emphasizes the concept of environmental protection and energy saving. The green mark of SCF series fuses indicates that they meet environmental protection standards and will not cause pollution to the environment during use. At the same time, its energy-saving design also helps to reduce circuit energy consumption and improve energy utilization efficiency.

When choosing CONQUER glass tube fuse, the appropriate series and model should be selected according to the actual needs of the circuit and the working environment. For example, for occasions requiring fast response, you can choose SMP or SCF series fuses; For the occasion of large impulse current, you can choose SDL/SDP series fuse. In addition, in the process of use, attention should be paid to whether the rated voltage and rated current value of the fuse match the circuit, to avoid improper selection of fuses can not work properly or burn. At the same time, it is also necessary to regularly check the working status of the fuse to ensure that it can normally play a protective role.

Prev Next

CONQUER glass tube fuse series SMP/SDL/SCF parameter introduction

Relevent Information

Recommended content